The most fragile part of the X-Scooter is the Sealing Surfaces. They can be very susceptible to dents and dings when the X-Scooter is disassembled if not properly protected. Our aluminum Seal Protectors fit over and around both the tail and body sealing surfaces and shield them from damage. These are extremely useful when traveling or storage.

Learn More >

Take your X-Scooter's Annual Service to the next level. Perform a vacuum test anywhere to make sure your scooter is leak proof. Every time you replace the shaft seals you should always make sure to test that they were installed properly. Originally, you would do that by submerging the whole scooter in water for an extended period. Now you can perform the same test on a bench.

Learn More >

Custom designed for X-Scooters, this new propeller will give you 12-20% more efficiency. You will be able to go farther and travel farther than you can with the regular Oceanic Prop system that come standard with on our X-Scooters.

Learn More >

The Deluxe scooter video camera mount is the perfect accessory for the serious underwater cinematographer. This rigid mount fits on any of our scooters and can accommodate almost any camera housing on the market, video or still cameras. The mount is operated with a simple locking wheel that allows the camera to be completely removed, rotated or locked, all with one hand. The mount will work with most underwater camera housings and we have adapter plates for Light and Motion, Gates, Aquatica, Subal and Nauticam. Other housings can be mounted with our universal plate. Learn More >

The Free diving Mount is for free divers and allows them to ride on the nose of the scooter in a streamline body position similar to a normal free diving form. This streamline position allows the diver to go extremely fast in the water. The scooter can be used for depth training, fun, or racing. Although intended for free divers, scuba divers can also use this package if they require hands free operation.

Learn More >

Prevent yourself from becoming cold in frigid or deep waters. This heating vest made by BtS Europe is designed to keep the core of your body warm inside your dry suit in extreme conditions. By maintaining that warmer temperature you will be more efficient during your dive, have better decompression and not to mention be more comfortable. You can use a battery canister to power the vest or you can take advantage of the power outlet option available on CUDA's. This enables you to power the vest through the CUDA's battery so you can cut down on the gear you are carrying on your long technical dives.

Learn More >

Make your scooter the ultimate dive tool by adding the single or dual gauge mount. Able to mount Suunto and Uwatec gauges with no modifications, you can have your primary gauges right in front of you at all times. The gauges are mounted to a aluminum plate and then attached to the X–Scooter's handle. This keeps your gauges in plain sight for easy viewing even while scootering.

Learn More >

To use a Dive Xtras X-Scooter correctly you must have a crotch strap to provide an attachment point for the X-Scooter tow cord.

A lot of technical divers using a back plate system have a crotch strap, however the common design of these is a single piece of 2in webbing between the legs. This works fine for preventing your equipment from moving around, however it can be uncomfortable when used as an attachment for a scooter with the thrust of the CUDA.

Learn More >

This easy to use bracket allows you to mount almost anything to your scooter. The mount securely attaches to the scooter with a standard cam-strap. The mount can easily be removed from the scooter to protect its attachments from damage when out of the water. The low profile aluminum mount only weighs 14oz. This minimal weight only means a small adjustment for neutral buoyancy.

Learn More >

Power your accessories with your CUDA's battery with the Power Outlet kit. Having to carry two canisters around for your video equipment (or other powered dive accessory) and personal light becomes cumbersome very quickly. Lighten your load with the Power Outlet. Plug your accessory into your CUDA's battery through an E/O bulkhead connector for reliable function and minimal impact on your X-Scooters runtime. Most accessories will draw minimal power from the CUDA battery. For example running a 30w heating vest for an hour only reduces your run time by ten minutes. With less gear on your person you will be lighter on dives and have an increased range of motion. Learn More >

Be the envy of all your dive buddies when you show up with your custom painted scooter. Match it with your gear, make it more visible underwater, or just stand out from the crowd. The Polyurethane paint we use protects the aluminum tail and body from scratches and corrosion. Certain colors are available in a textured finish as well as a smooth finish.

Learn More >

X-Scooters are made to be durable and robust, but eventually moving parts and seals wear down over time. Our Spares Kits enable you to quickly fix your X-Scooter and get it back in the water. There are four different kits that fit different needs. Our Annual Service kit replaces seals and other wear parts. Our Standard Spares kit comes with every X-Scooter package. The Pro Kit is great addition to your dive boat. The expedition is a must for long excursions and includes everything from o-rings to new electronics for your X-Scooter.

Learn More >