Support
Because Everyone Needs a Little Help Sometimes
Direct
Have a technical question? Scooter behaving in irregular ways? Want to tell us how much you love your Dive Product? We strive to promptly answer your questions, inquiries or concerns so you can get back to enjoying your Dive Xtras product as quickly as possible.Phone
425.296.6570 (8-5 PST weekdays)
Forums
Ever been to the forums yet? Get involved with the X-Scooter Community and connect with divers with the same interests. These are some popular forums that we are involved in.
Manuals
Diagrams
Servicing
Learn how to how to maintain your scooter, prepare for a dive, proper technique for using your X-Scooter Owner's manuals also include detailed diagrams of your scooter for servicing.
All X-Scooters User Manual
CUDA Fury 1150 Manuals
These are detailed exploded view diagrams of all the parts that make up that section of the Sierra or CUDA. Each diagram includes factory part numbers for easy reference or replacement.
Sierra Diagrams
CUDA Diagrams
As with all sophisticated equipment, your X-Scooter will require you to do some maintenance to keep it running at its full potential. These are manuals to perform various tasks to get your X-Scooter in the water again. If you have unanswered questions feel free to contact us and we will walk you through the process.
Trim Weights
Warranty
Every body of water has a unique density. To adjust, every X-Scooter comes with a weight pouch in the nose and tail. Using lead shot (recommended), you can dial in your scooter so it sits just slightly positive in the water.
This weight table is meant to be a starting point for configuring your X-Scooter. Make sure you test, adjust, and re-test before diving into a new body of water.
| Scooter | Fresh Water | Salt Water | |
| Sierra Standard | Nose | 21oz (599g) | 27oz (767g) |
| Tail | 5oz (129g) | 13oz (367g) | |
| Sierra Long Body | Nose | 23oz (651g) | 34oz (955g) |
| Tail | 14oz (404g) | 25oz (699g) | |
| CUDA 400 | Nose | 15oz (425g) | 22oz (623g) |
| Tail | 6oz (170g) | 14oz (404g) | |
| CUDA 650 | Nose | 0oz (0g) | 8 oz (226g) |
| Tail | 7oz (767g) | 18oz (510g) | |
| CUDA 850 | Nose | 12oz (340g) | 23oz (652g) |
| Tail | 10oz (283g) | 22oz (623g) | |
| CUDA Fury 1150 | Nose | 15oz (425g) | 22oz (623g) |
| Tail | 6oz (170g) | 14oz (404g) |
Dive Xtras provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal use and service as outlined in the owner's manual for 3 years from the date of purchase, with the following exceptions:
- Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
- All batteries and chargers are warranted by Rabbit Tool Inc. Deep Sea Supply, or the original battery/charger manufacturer.
- Dive Xtras will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
- All paint finishing, powder coating, material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
- Dive Xtras does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
- A 1 year warranty on all electronics.
Should your X-Scooter prove to be defective within the terms of the warranty, it will be repaired or replaced (at Dive Xtras discretion) free of charge with the exclusion of shipping and handling charges. Dive-Xtras will not be responsible for any shipping charges to or from Dive-Xtras Inc.
